Gear motor
Model MMP-TM55-24V GP57-007 accepts any 24-volt DC source, including battery power. The unit holds a long battery charge and operates at very low noise. It is suited for use in electric vehicles and other applications. The motor measures 2.24 inches in diameter by 6.7 inches long, and has a keyed output shaft measuring 12 millimeters in diameter by 25 millimeters long. Four equally spaced face-mount M5 threaded holes enable mounting. The reversible gear motor’s output is rated for 9.5 inch pounds of continuous torque at 675 revolutions per minute, and 50 inch-pounds peak. The motor weighs approximately 3 pounds and requires 3.6 amps at 24 volts to generate its full load torque. Motor windings for 12, 36, 48, 60 and 90 volts are available. The design is rated at an IP 54 protection level for operation in harsh environments. The manufacturer’s compatible speed controls, models MMP 25A-24V or MMP 20A-24V-RSP, enable variable speed.
Midwest Motion Products, Watertown, Minn.
Circle 108 on Reader Service Card or visit freeproductinfo.net/gn