The RD7000 and RD8000 are lightweight and feature an ergonomic design. The receiver and transmitter for both models are available with a backlit LCD screen for use in any light conditions. The RD8000 is manufactured for use in a variety of applications, and the RD7000 is designed for users who need a locator for more specific applications. The RD8000 features the company’s iLOC system, which uses Bluetooth technology to allow operators to control the unit remotely. The model also features SurveyCERT, which passes information to third-party applications for analysis on a PC or PDA.
Contact: (207) 647-9495
Camoplast Track Vehicles
The SW 4S can be converted between track and wheels for use all year, and can be configured to perform a variety of maintenance jobs. The vehicle is available with a front universal quick-attach mounting system that can accommodate standard skid steer implements such as snow blades and snow blowers, articulating mowers, angle brooms, cold planers, power tillers, rakes and pallet forks. It also can be used with salt and sand spreaders, which can be attached to the rear of the vehicle. The vehicle includes a microprocessor-based operator information system and full-color display. The cab is insulated and features a roll-over protection system for safety.
The TC550 features an on-demand hydraulic steering and blade control system that is designed to improve performance, reduce heat and extend system life. Powered by a 525 hp turbocharged diesel engine, the 110,000-lb. compactor features an upgraded design from previous models, including internal piston construction and high-pressure o-ring seal improvements. The compactor has a triangular wheel configuration for full-width coverage in a single pass, and delivers 733 lbs. per linear inch of compaction force. It is available with the company’s asset management system, which uses GPS and satellite technology to track operational information. The system also measures machine hours and location, sends e-mail alerts for maintenance, and issues fault codes for components such as pump gearbox pressure and hydraulic oil temperature. Additional features include durable steering cylinder mounting to absorb frame torsion and twisting, and electronic joysticks that eliminate the wear point of brass bushings.
Chemthane 1350 is an aliphatic polyurethane concrete joint-filling compound for interior and exterior floors with moderate to light wear applications, such as distribution and warehousing facilities. The chemical-resistant compound is resistant to moisture, mildly acidic or mildly alkaline environments. It protects against freeze thaw dynamics, provides UV stability and can be matched to the color of any floor coating.
The portable truck scale is manufactured for a variety of applications, including construction, processing and materials handling. It features a steel deck that is available in 10′ and 80′ lengths and 10′, 11′ and 12′ widths. The deck also has a maximum capacity of 100 tons. The scale’s pre-assembled deck modules with self-seating hinge connectors simplify moving between sites. With a 90,000-lb. concentrated load capacity, the scale uses 75,000-lb. capacity load cells. It also features a span deflection ratio of 1:1100 for legal highway loads. Load cells and electronic components can be accessed through the scale deck and are protected during transport. Steel approaches and ramps are optional.
Contact: (800) 343-6802
The fuel filters are manufactured to eliminate harmful water, dirt and debris from stored fuel by filtering gas, diesel, 2-cycle mixed gas, kerosene and heating oil. The filters are specially coated and constructed of non-stick stainless steel, and built into high-strength polypropylene funnels, which are self-cleaning and do not require any maintenance. The filters are available in four sizes: F1, F3, F8 and F15. The F1 and F3 can be used for filtering less than 5 gallons; the F8 is used for filtering more than 5 gallons; and the F15 has dual filters and can be used at a fuel pump.
The Bedrock is a dump body with an elliptical radius for smooth dumping. The floor, sides and rear are constructed of Hardox 450 steel for durability. Available in 13′ to 21′ lengths, the dump body includes an I-beam understructure for floor support. A heated understructure also is available for use in cold weather. Aluminum fenders are optional.
Contact: (800) 255-4345
Snow & Ice
The SP-2400 is an all-electric replacable tailgate spreader that can spread road sand, bulk salt or other mixtures up to 30′ out. With an all-steel frame and corrosion-resistant powder-coat finish, the spreader has a self-leveling spinner that helps maintain a consistant spread pattern as the dump bed rises and lowers.
Contact: (800) 725-8377