The 9030 Series is manufactured for large-scale scraping applications. The 9430 and 9530 models weigh up to 46,000 lbs., while the 9630 has a maximum weight of 50,000 lbs. The tractors have six-cylinder PowerTech Plus engines ranging from 425 to 530 hp, depending on the model. The tractors are available with Vari-Cool fan drives and cooling systems, 18-speed transmissions, front and rear axle supports, high-slow hydraulics, back-up alarms and scraper drawbar supports. The tractor can be unhitched from the scraper. Additional features include color-coded controls and an AutoLoad system that adjusts the scraper’s cutting-edge height automatically.
The WA250-6 has a 25,441-lb. to 25,761-lb. operating weight and a bucket capacity up to 3.5 cu. yds. Powered by a 138-hp Komatsu SAA6D107E-1 engine, the unit has a hydrostatic transmission system that provides only the power needed for a particular application. A traction control feature prevents tire slippage on wet surfaces and soft ground, and eliminates bucket penetration while stockpile loading. An S-mode control increases handling on slippery surfaces by controlling engine speed and the hydrostatic transmission motor while the unit is operating at a low speed. The pressurized cab is designed to reduce noise levels, and a damping mount system helps reduce noise, shock and vibration in rough conditions. The loader also is available with an equipment monitoring system that alerts operators of problems with items such as oil pressure and coolant temperature.
The MG 1900 has a 1.1-cu.-yd. high load capacity and a closing force up to 8 tons. Manufactured for a 20 to 30 metric ton weight class, it weighs 4,189 lbs. and generates pressure up to 5,076 lbs. per sq. in. The unit also has a 40-gal.-per-min. hydraulic flow rate. Featuring a carbon-steel design, the grapple jaws can open 87“ in width. The jaw tips include wear edges that can be flipped for an additional surface. The attachment also features a 360° hydraulic rotation unit, two hydraulic cylinders, which are protected from debris, and a built-in rotation protection system to reduce wear on the carrier. Loading plates are optional.
Contact: (413) 746-0020
The 17SR ACERA is a compact excavator with an adjustable track gauge for maneuverability in confined spaces. With a 3,638-lb. maximum operating weight, the unit has a bucket capacity of up to 1.55 cu. ft. and can dig to 7’1“ deep. Using three pumps, the smart hydraulic system powers the unit to lift, swing and travel simultaneously. Powered by a 15.2-hp diesel engine, the unit has a bucket breakout force of 2,900 lbs.
Oil containment system
C.I. Agent Solutions
Agent X is a hybrid fabric that uses a blend of polymers to attract oil and other hydrocarbons on land and water. The blend transforms spills into a rubber-like mass that can be disposed of in a landfill or recycled. Part of the company’s C.I. Barrier Boom line, the unit allows water to flow freely.
Contact: (866) 242-4368
The S-60 and S-65 Trax fixed-track booms are 8′ 6″ wide. The models have an 11′ inside turning radius and a 21′ outside turning radius for maneuverability in confined areas and for travel on and off a delivery trailer. The units’ tracks measure 17″ × 40″ and are constructed of steel-reinforced rubber. They feature a four-point track system for use and transport on various surfaces. The system also includes a grease tensioning system for adjustments. The S-60 model has a 9.2-lb.-per-sq.-in. ground pressure, and the S-65 has a 9.7-lb.-per-sq.-in. pressure, minimizing damage on sensitive surfaces. The tracks can move up and down 23° to adjust to the landscape. The tracks’ V-shape design prevents debris build-up. An active oscillation axle system changes the axle position based on ground conditions. Wheeled versions of the S-60 and S-65 can be equipped with interchangeable track systems that can be bolted on and removed when needed. The S-60 has a lift capacity of 500 lbs., a 50′ 10″ maximum horizontal outreach and a 66′ working height. Also with a 500-lb. lift capacity, the S-65 has a 56′ 2″ outreach and a 71′ height.
The Crysteel Contractor truck body can be used as a dump truck and work truck. The dump body features a rugged design for use in harsh conditions. Opening the truck’s split fold-down sides or tailgate allows equipment and building materials to be loaded and unloaded from the truck bed. The truck body is available in light-weight standard duty contractor and heavy-duty contractor models.
Contact: (800) 533-0494
William Frick & Co.
The low-profile curb markers are available in reflective and non-reflective models and are designed to prevent damage by helping work crews identify buried cables and pipelines. The markers come in standard domed urethane and clear window configurations and can be permanently adhered to concrete. The clear model features 1.5″ numbers that can be viewed under a protective dome, and also can be customized with logos and contact information. Available in a variety of colors and sizes, the markers also can be used to number manholes, and indicate route numbers and buried junctions. The markers have a 20-year service life. Custom kits that include curb markers, vinyl numbers and bonding adhesive are available.
Contact: (847) 918-3700
The PAR LED white light bulbs feature a 50,000-hr. rating or a service life of up to 40 years. The 120-volt bulbs are cool to the touch and can fit standard light sockets. The line includes the 150 LED PAR 38 bulb, which measures 4.8″ × 4.8″. The 60 LED PAR 30 measures 3.74″ × 3.23,” and the 42 LED PAR 20 model is 2.48″ × 2.95″
Contact: (515) 388-1011
The Weathergard Series of LED exit signs are manufactured for use in cold, damp or wet environments, and in areas where damage or vandalism may occur. The signs include automatic switching and charging circuits. The nickel cadmium battery allows operation for 120 minutes during emergencies. They feature a 24-hr. battery recharge cycle and can operate in environments ranging from -49° F to 113° F. The sign enclosure, which is attached to an aluminum frame, is manufactured with clear polycarbonate. The signs can be mounted to walls and ceilings. Black, gray, white and brushed finishes are available.
Contact: (203) 575-2044
The Recharger 330XL features a 52.2-cu.-ft. storage capacity. The chamber’s high-density polyethylene construction makes it resistant to chemicals from runoff and increases the lifespan of the unit. Measuring 30.5″ × 52″ × 8.5″, the unit includes two side portals for manifolding. It can accommodate 24″-diameter pipes into its endwall when larger flow rates are needed. The unit has an 80-cu.-ft. storage capacity when surrounded by stone.
The ProCore 864 and ProCore 1298 are manufactured to improve aeration in large areas. The 64″-wide 864 model has eight coring heads, and the 1298 model measures 98″ wide with 12 coring heads. The units’ coring head drive eliminates hopping, rocking and vibration. The 864 features a 64″ aeration swath while the 1298 has a 98″ aeration swath. Additional features include tine guide and impact resistant systems.
XTend is a mobile high-bay storage system that is manufactured for storing archived materials off-site. The system features at least 30 shelves of materials that can be accessed using wire-guided high-reach trucks. The shelves are mounted on wheeled carriages that run on tracks, and the carriages can be pushed together to eliminate extra aisles.
Contact: (800) 492-3434
Video camera system
The iPulse Module connects to network video cameras and detects when they have frozen, rebooting them automatically. Manufactured for use with wired, wireless and power-over-ethernet cameras, the 1 ¼” × 2″ × ¾” unit plugs into a camera and uses the same power source.
Contact: (877) 731-5550
Tire management system
Dossier Tire Management uses wireless technology to monitor tires, and identifies and reports those that need maintenance. The system tracks issues, such as under-inflation problems, mileage and tread depth. The system communicates with the Dossier tire probe that scans a barcode on a vehicle’s tire and displays truck and tire information in the system. The system issues audio alerts and messages to indicate when a tire has low air pressure or reaches minimum tread depth level.
Contact: (800) 525-5256
Parks and Recreation
The storage bins are manufactured for transporting athletic equipment, pool toys and other accessories at recreational facilities. Constructed of a powder-coated steel wire, the bins are available in 39½”- and 29½”-high models with 20-cu.-ft. and 12-cu.-ft. capacities. The bins are designed to promote air circulation and visibility and will not bulge or sag when filled. The rust-resistant containers can be covered and locked, and include four casters that swivel 360°.
Contact: (800) 700-7450