Vibratory asphalt compactor applies force to resurface roads
Rely on utility-sized, double-drum CB-334E to maintain streets, roads, and alleys, or to create paths in parks or recreation areas. Each drum measures 31 ins. in dia. and delivers 51-in. compaction width. Overall machine length is 123 ins., with an operating weight of 8,731 lbs. To ensure a flawless mat, hydrostatic propel system provides smooth starts and stops, plus controls service braking. Runs on 4-cylinder, 50-hp. diesel engine that meets U.S. Tier 2 emission regulations. Combines high centrifugal force, frequency, and amplitude to reach density requirements in just a few passes. Select from 3 vibratory modes: front or rear drum only, or both drums. Operator controls machine from sliding station, which includes a bucket seat and plenty of leg room. Station moves from side to side to enhance operator visibility of drum or tire edge. Also locks into right, left, or center position, when operator pulls upward on pin located on right side of seat. Propel lever lets operator control machines speed and direction. Tight turning radius and high curb clearance ease maneuverability in congested areas or around vertical obstructions. Engine hood slopes downward, away from operator, to enhance visibility of objects in front or rear of machine. Other features range from a pressurized system for spraying water over machines drums, to self-adjusting scrapers that remove material from drum surface. Isolation mounts limit engine vibration to operators station. In addition, machine runs quietly to please operator and bystanders. Instrument panel lets operator quickly verify machine status, and many Daily Visual Maintenance points allow fast, at-a-glance checking. Options include water distribution mats, sun canopy, various lights, and suspension seat.